Inspection and operation: In the normal operation of the crusher, such as the case of a sudden stop in front did not identify the cause of the crusher types, can not be forced to start the device after the causes, the material inside the crusher should clean it out after the break machine classification, we can in order to boot. Note that if the crusher operation sound is normal, when there grate hammer and beat crusher parameters and friction, abnormal sound should be promptly treated. Non-functioning equipment to be checked. After crushing machine downtime, you should also check the hammer, liner, the wear material grate bars. Hammer crusher rotor rotor is the main working part of hammer crusher rotor from the spindle, hammer plate, pin, hammer, etc., open the disc evenly distributed pin hole, with the pin hanging hammer, in order to prevent axial movement of the disc and hammer at both ends of the fixing pin lock nut. The rotor is supported on two rolling bearings, bearings bolted to the lower body by abutment, and two positioning pins fixed to the center from the upper bearing. In order to make the rotor in motion a certain kinetic energy storage, to reduce the peak load of the motor and reduce the hammer wear specially fitted at one end of the main shaft of the flywheel. Here are several major components of the rotor to be described in detail. Crusher Type | Xinjiang crusher | Taihang mine by mine Weihui Taihang Machinery Factory. Weihui Taihang Mine Machinery Factory (www.thksjxc.com) strong, credible, Xinxiang in Henan and other transportation equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead the Taihang mine and you hand into the brilliant, for a better future!