Baghouse pressure loss refers to the gas inlet to the outlet from the filter pressure drop, also known as resistance. Dust bag pressure loss depends on the following three factors: pressure loss ⑴ device structure. ⑵ filter pressure loss. And the nature of the relevant media (e.g., porosity, etc.). ⑶ piled on the pressure loss filter dust layer. Dust principle - cartridge filter system equipment in the role of the main blower, dust and gas into the air filter box at the bottom of the lower part of the air inlet from dust dusty gas pretreatment, and then enter into the box from the bottom dust removing interior thereof; dust adsorbed on the outer surface of the filter cartridge, clean filtered air enters the cabinet through the filter cartridge and the clean gas collection chamber to the discharge outlet. With the new dust filter condition continued to accumulate in the outer surface of the cartridge dust piled up dust manufacturers, equipment running resistance will increase accordingly, in order to ensure the normal operation of the ESP system works, dust the upper limit is the resistance should be maintained within the range of 1400 ~ 1600Pa, when more than this limited scope should be given automatic controller PLC pulse blocking or timing issue commands through a three-state cleaning. ESP type | Hubei dust | Taihang mine by mine Weihui Taihang Machinery Factory. Weihui Taihang Mine Machinery Factory (www.thksjxc.com) strong, credible, Xinxiang in Henan and other transportation equipment industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead the Taihang mine and you hand into the brilliant, for a better future!